Introduction to the remote control indicator:
Figure 4
To operate the application:
enter the "Other Settings" interface, complete the compass
calibration according to the text prompt and the operating steps (Figure 4). Once the
compass calibration is complete, automatically enter the flight operations interface.
10.6 Satellite search status (default GPS mode)
When the remote control is in GPS mode, the GPS light is on, indicating that the GPS is
entering the satellite search state. When the red rear aero light flashes, the satellite
search is complete and the remote beeps, the drone can be used (Figure 5).
Note:
Once the signal from the satellite reaches at least level 10, the drone can take off.
Figure 5
10.7 Start/Stop (GPS mode)
To unlock the drone, push the left and right control rods on the remote control outwards
(the drone cannot be unlocked for operation unless the satellite search is completed)
(Figure 6).In this condition, the aeroplane can take off and all the lights will illuminate
after takeoff (Figure 7).
App operation: click the "One Key Unlock" icon (Figure 7) in the APP control interface.
the key unlock function can also be achieved
Figure
6Figure 7