9. Pre-flight environmental requirements:
Operate the drone in an outdoor open area free of rain and snow and with wind strengths
below level 3 and stay away from crowds, trees, power lines, tall buildings, airports and
signal towers.
Do not use it in enclosed areas or in a place with a weak GPS signal.
10. Preparation for flight:
WARNING:
Please make sure the drone/remote is fully charged, otherwise it cannot take
off.
10.1 Turn on the power to the drone, place it
on the launch pad - the horizontal spot for
automatic frequency adjustment, the front
white indicator light and the red indicator light
on the rear arm blink (battery light is on).
Note:
Adjust the direction of the drone so that the front of the drone is facing forward and
the drone is positioned horizontally.
10.2 Open the WiFi function on your mobile
phone and select "4DRC-4K- GPS*****" in the
WiFi list, connect the device and then open the
app.
10.3 Turn on the remote control (default
mode), long press the "ON/OFF" button on the
remote control (step 1), the power light will
come on. Push the throttle stick up (step 2)
and then down (step 3). When the pairing
frequency is successfully paired, the UAV
indicator light will turn on instead of blinking.
