background image

GPS

6. Name of each part of the remote control:

Fine adjustment (press and 

hold)/speed gear

Power Indicator

Left stick

Power switch (long press)

Horizontal calibration (short 

press) Geomagnetism 

(compass) calibration (long 

press for 3s)

One-key take-off / one-key 

landing

Press the 

emergency 

pause button at 

the same time

Photo / Video (long 

press)

Right stick

GPS switch (long 

press)
Headless mode
One-key return

Description of remote 

control indicator:

One-key 

return

Headless 

mode

Normal/GPS button: Press and hold this button for 3s after frequency matching to switch between 

normal mode and GPS mode (It is by default GPS mode after starting up, GPS indicator will be on, 

and when it enters normal mode, the indicator will be off).

Headless mode button: Press this button once to enter the headless mode, the headless light will 

be on; press it again to exit the headless mode, and the headless light will be off.

Return button: Press this button once to return home, and the return light will be on. Press again to 

cancel the returning, and the return light will be off.

7. Remote control battery installation:

AAA battery

Battery cover

Battery installation:

7.1 Press the battery cover button with 

a screwdriver and remove the 

battery cover at the same time.

7.2 According to the polarity 

instructions on the battery 

compartment, remove the battery 

cover on the back and insert a 4X 

“AAA” battery (not included).

Note

1. The positive and negative poles and the positive and 

negative poles of the battery box must be identified when 

inserting the battery, and error is not allowed.

2. Do not mix old and new batteries.

3. Do not mix different types of batteries.

When the aircraft is not in flying, disconnect the 

battery plug from the power connector of the aircraft 

circuit board to prevent the battery from being 

damaged.

Warning

Instructions in charging:

Do not put the charged battery in a place with high temperature and heat, such as an 

open flame or an electric heating device, otherwise damage or explosion may occur.

Do not hit or beat the surface of hard objects with the battery.

Do not disassemble the battery.

Do not immerse the battery in water, and please store the 

battery in a dry place.

Do not leave battery alone when charging.

04

Содержание 4D-F9

















Отзывы: