– 32 –
– 33 –
ENG
Using the battery in damp conditions
The casing of the BATEC MOBILITY battery provides good protection
against rain and dampness for the cells and circuits inside. This pro-tection
is enough for the battery to withstand these conditions occa-sionally but
regular, prolonged exposure to damp and rainy conditions may cause the
battery to stop working properly. Thus, we recommend you avoid these
circumstances and use the HANDBIKE BATEC ELEC-TRIC as little as possible
in rainy or snowy conditions.
Battery life
The life of the battery is between 200 and 500 charging cycles, and
between 1 and 3 years, depending on several factors, including tem-
perature, frequency of use, consistency of use and other individual issues
(user weight, driving style, terrain, etc.).
To get the most out of your battery we recommend you:
IMPORTANT!
•
Drive gently at moderate speeds.
•
Avoid exposure to high temperatures.
•
Avoid exposure to low temperatures (below 0ºC).
•
Avoid leaving the battery unused for long periods of time.
The battery won’t just die suddenly; it gradually begins to perform more
poorly. If your battery suddenly stops working, it is normally due to a
technical problem and not the end of its lifespan.
Disposing of the battery
As with all batteries, the BATEC MOBILITY batteries must be disposed
of properly. Check with your local waste-management centre. Contact
BATEC MOBILITY if you have any doubts.
Battery indicator operation
The battery status indicator is on the display (LCD panel) of the BATEC
ELECTRIC HANDBIKE. The indicator is made up of several bars that indicate
the % of energy available. (
See fig. 59)
4.9.4. TECHNICAL SPECIFICATIONS OF THE 280 WH BATTERY
•
Dimensions: 350 x 140 x 60 mm
•
Weight: 2.6 kg
•
Power: 280 Wh
•
Voltage: 36 V
•
Maximum discharge current: 29 A
•
Maximum charge current: 5 A
•
Internal resistance: 200 mOhm
•
BMS consumption: < 0.2 mA when on; < 0.02 mA when off
•
Battery range by model:
–
HANDBIKE BATEC ELECTRIC MINI 2 / MINI / ELECTRIC 2 / RAPID 2 /
SCRAMBLER: 22 km*
4.9.5. TECHNICAL SPECIFICATIONS OF THE 522 WH BATTERY
•
Dimensions: 350 x 140 x 60 mm
•
Weight: 4 kg
•
Power: 522 Wh
•
Voltage: 36 V
•
Maximum discharge current: 29 A
Содержание BATEC ELECTRIC 2
Страница 27: ...52 FIG FIGURES...
Страница 32: ...14a 16a 14b 16b 15 17 FIG...
Страница 39: ...44 46 48 50 49 45 47 FIG...
Страница 41: ...59 7 1 2 3 4 5 6 NUM 7 100 6 90 5 80 4 60 3 40 2 20 1 8 1...