49 Bespoke BATEC ELECTRIC 2, Руководство пользователя, Страница: 12 / 41

– 22 – – 23 –
ENG
4. OPERATING THE HANDBIKE BATEC ELECTRIC /
USER GUIDE
4.1. DELIVERY
Your new HANDBIKE BATEC ELECTRIC will be delivered in a cardboard box.
In order to prevent damage during transport, parts that must be assembled
later, like the battery, are packaged separately inside the cardboard box.
4.2. UNPACKING
•
Check that the outside of the cardboard box hasn’t been damaged in any
way during transport.
•
Remove all of the packing materials.
•
Remove the parts of the HANDBIKE BATEC ELECTRIC (including the
battery and charger) from the cardboard box and check that they are all
there.
•
Check that all the parts are in proper conditions, without any sort of
damage, scratches, tears, dents, irregularities or other defects.
•
If you find any problems, or if any pieces are missing, notify the au-
thorised distributor immediately.
4.3. ELEVATION, TRANSPORT AND STORAGE
The HANDBIKE BATEC ELECTRIC has been designed so that users can easily
remove and detach the battery on their own.
•
When taking the HANDBIKE BATEC ELECTRIC on any means of trans-port
(car, bus, train, plane, etc.), we recommend removing the battery before
your journey: turn the battery key to OPEN, remove the key and then
remove the battery.
•
When lifting the HANDBIKE BATEC ELECTRIC, we recommend removing the
weight as indicated in section 3.10 and the battery as per section 4.9.1.
•
When transporting the HANDBIKE BATEC ELECTRIC in the boot of a
vehicle, we recommend leaving it attached to a wheelchair whenever
possible.
The BATEC HANDBIKE is not designed to be used as a means of trans-port
inside a vehicle.
The HANDBIKE BATEC ELECTRIC ELECTRIC should be stored in a cool, dry
place, protected from direct sunlight and rain. It should not be kept out
of use for more than two months.
4.4. ATTACHING THE HANDBIKE BATEC ELECTRIC:
•
Step 1: Get in front of the HANDBIKE BATEC ELECTRIC, with the han-dlebar
centred in front of the wheelchair, with the brake on.
(See fig. 14a, 14b)
•
Step 2: Grab the HANDBIKE BATEC ELECTRIC by the handlebar and pull it
towards you, rolling the frame stand until the detaching ramp on the
anchoring bar touches the front axle of the bar on the wheel-chair.
(See fig.
15)
•
Step 3: Tip the handlebar, lifting the front wheel, while pulling the
HANDBIKE BATEC ELECTRIC towards you. When the detaching ramp has
passed the front axle of the bar on the wheelchair, let go of the handlebar
and put the front wheel back on the ground.
(See fig. 16a, 16b)
•
Step 4: Take off the brake on the wheelchair and push gently on the
HANDBIKE BATEC ELECTRIC handlebar to make sure the front axle is
securely in place.
•
Step 5: Push the handle until it clicks, so that both the wheels on the
HANDBIKE BATEC ELECTRIC stand frame and the front wheels on the
wheelchair are off the ground. Your HANDBIKE BATEC ELECTRIC is now
attached.
(See fig. 17)