Installation Manual v3.1
|
VISIX S-Series Network Camera
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
29
Install the Mounting Base
3.
Secure the mounting base to the cap with screws.
4.
Align the camera with the mounting base, and secure the camera with screws.
Secure the Camera
5.
Connect the video output connector to the monitor and connect the power connector to the power supply
to adjust the surveillance angle and image.
6.
Adjust the image and focus.
7.
Install the dome cover back to the camera and tighten the lock screw to complete the installation.
INSTALLATION - PENDANT MOUTING
Before you start:
The Pendant mounting bracket is not included in package. If you choose this mounting type, you have to
prepare a bracket first. The pendant mounting bracket shown below is only for demonstration.
Note:
When choosing a pendant mounting bracket, you must pay attention to the size of the cap which should
match the mounting base of the camera.
Size of the Mounting Base