Replacing the Battery
www.3ware.com
29
5
Once the bottom of the module is free, slide the module up to
release the clips on the top.
Figure 22. Removing the battery module
6
Disconnect the battery power cable from the BBU.
To do so, press down on the lever-like clip on the battery power
connector and slide it out of the slot.
(If desired, you can remove the BBU control module to
facilitate disconnecting the power cable.)
Figure 23 shows a view of removing the power cable
connection from the underside of the BBU control module.
Bottom clip
a) Push the battery
module down gently.
b) Lift out the bottom
of the battery module
to release the clip from
the bottom hole.
c) Lift up to remove the
clips on the top edge.
