Installation Instructions
www.3ware.com
25
4
Turn the controller over, insert the plastic screw head that you
removed in step 1 into the plastic post, and tighten it gently but
firmly. (Do not over-tighten!)
Warning!
To avoid possible damage to the controller
and the motherboard, make sure the module is
connected in the proper orientation, and that the
plastic post is attached.
When the plastic post and the connector are attached
correctly, the module is in the correct orientation.
5
Hook the clips on the top of the battery module over the slots
on the top edge of the controller.
Figure 18. Clips on the battery module hook over slots on the
top edge of the controller
