3ware Escalade ATA RAID Controller CLI User Guide
7
www.3ware.com
Note:
•
Ι
f
c
is not specified, information for all controllers is dis-
played, including a brief description of each
.
•
Ι
f only
c
is specified, information about the
c
th controller is
provided in detail.
•
Ι
f
c
is specified and
u
is also specified, information about
the
u
th unit on the
c
th controller is provided in detail.
•
Ι
f c is specified and
u
is also specified with status, text and
hex code of the status is displayed in the form OK (0xFF).
Also, an error code is returned, bit masking bad drives if any
of the drives used by the array are bad. For example, if port 2
is bad, the return code would be 4 (in hex).
•
Ι
f c is specified and u is also specified with rebuildstatus,
then the status of the array is displayed (e.g., 0=array is not
rebuilding, 1-99 = the percentage of the rebuild)
•
Ι
f
c
is specified and
p
is also specified, information about
the
p
th port on the
c
th controller is displayed.
Examples using Interactive Mode
info
Example:
Escalade CLI> info
Sample of output:
List of controllers
-------------------
Controller 1: Escalade 7000-2 (2 ports)
Controller 0: Escalade 7500-8 (8 ports)
info
for specific controller
Example:
Escalade CLI> info c0
