20
Note:
The following 3T-MOTORS transmitters do not have a P2 / Set Up button:
Setting
Pairing handheld transmitter
Change direction of rotation
Setting end points
Changing end points
Intermediate position
Pairing another handheld
transmitter
Delete handheld transmitter
Delete all handheld transmitter
Jog mode
Delete end points
Activate / deactivate
initialization of the pairing
process by switching on the
power supply
Programming
P1 or switch on power supply > P2 > P2 > Up oder Down
Up + Down simultaneously (2 sec.)
Initialization of the end point setting
Setting upper end point
Setting lower end point
Jog mode
Changing upper end point
Changing lower end point
Setting intermediate position
Move to intermediate position
Delete intermediate position
P2 (a) > P2 (a) > P2 (b)
P1 > Up (b) + Down (b)
P2 (a) > P2 (a) > P2 (b)
P2 > Stop > P2
P2 > Up > Ab
P2 > Down > P2
P2 > Up > Auf
P2 > Up > P2
Up > Stop > Stop (5 sec.)
Down > Stop > Stop (5 sec.)
During ascent or descent > P2
Up > Up + Down simultaneously (5 sec.) > Up or Down > Stop (5 sec.)
Down > Up + Down simultaneously (5 sec.) > Up or Down > Stop (5 sec.)
Up or Down > Stop > P2 > Stop > Stop
Stop (2 sec.)
P2 > Stop > Stop
a = transmitter already paired / b = transmitter to be deleted
b = new handheld transmitter
a = transmitter already paired / b = transmitter to be deleted
Quick overview programming commands
1
2
3
4
5
6
7
8
9
10
11
PROGRAMMING
3T-MOTORS Radio tubular motors
| Programming
Radio wall transmitter
WS1
Radio wall transmitter
WS2
Radio wall transmitter
WSE2
Radio timer
WSTF1
Radio timer
WSTF5
Radio mini transmitter
FMSF
Button combination:
Press Up + Stop buttons simultaneously (FMSF / WS1 / WS2 / WSE2).
Press the Set and Mode buttons simultaneously (WSTF1 / WSTF5).
