Helmet Mount
1. Insert the free end of the
Helmet Strap through one
of the slots in the base of
the Helmet Mount.
2. Thread the same end
in to the helmet’s vent
and then back up to the
Helmet Mount through
another vent. Then insert
the strap through the
other side of the Helmet
Mount. Then insert the strap back through the helmet vent.
3. You should have now both ends of the strap inside the
helmet. Take both ends of the strap and pull to tighten and
then attach together with the Velcro.
4. Turn the Waterproof Case (or Mounting Adapter) onto the 1/4-
20 screw of the Helmet Mount until secured.
5. Turn the Locking Wheel so it applies pressure to the case to
keep the connection secure.
6. Loosen the Tilt Knob, to adjust for the proper aiming angle;
then tighten the knob.
Please note this Helmet Mount will only work with vented
helmets.
TILT
KNOB
LOCKING
WHEEL
STRAP
1/4-20
SCREW
MOUNT