USING THE INCLUDED ACCESSORIES
Waterproof Case
CAMERA IS SUBMERSIBLE
UP TO 2M IF CAMERA IS
CORRECTLY SEALED IN
WATERPROOF CASE
1. Insert a finger at
the half circle of the
clamp by prying the
clamp up away from
the case.
2. Before sealing the
case, inspect the
water sealing gasket to be sure it’s in good condition. You
can test the gasket by closing the case without inserting
the camera.
3. Submerse the case completely in a bowl of water for about a
minute. Remove the case from the water, dry off its exterior
with a towel and then open the case. If the entire interior is
dry, the case and gasket are safe for use under water.
4. There are just two buttons required for recording video and
images: the Shutter, and the Power Button.
5. Remember to put the Mode Switch in your desired recording
position before inserting the camera in the waterproof case.
There is no external button for the Mode Switch.
CLAMP
SHUTTER
POWER