EN
- 2 -
User Manual
Wireless charger
imported by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2019-10-02
V1.1 ss
66583
1 Safety Instructions
The user manual is part of the product and contains important informati-
on for correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the
product.
•
Keep this user manual.
•
Compare the specifications of all used devices to ensure
compatibility.
•
Do not open the housing.
•
In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
•
Do not modify or alter products, product parts and accesso-
ries
constructively.
Not meant for children. The product is no toy!
•
Secure packaging, small parts and insulation against acciden-
tal
use.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
•
Only use in dry ambience.
Magnetism
The product contains magnetic materials.
•
Regarding the compatibility with implanted medical devices,
consult a doctor before use.
•
Keep a minimum distance of 20 cm to medical equipment.
•
Do not store or operate near bank cards.
Risk of stumbling
•
Place, install and transport product, product parts and acces
sories in a safe way.
2
Description and Function
2.1
Wireless charging pad
This product is a charger for wireless charging of mobile devices such as mobile
phones or camaras via wireless induction. The wireless charger can be charged via
the USB charging cable to PC or USB charging adapter.
2.2
Scope of delivery
Wireless charger, USB charging cable, User manual
2.3
Operating elements and product parts
1 Induction coils / shelf
2 LED for standby and charging state
3 USB charging cable
4 USB 2.0 Micro female (type B)
2.4
Specifications
Wireless charger
66583
Model
3S-1046
Connections
USB 2.0 micro female (type B),
wireless charging interface
Input
5 V
, 2 A max.
Output
5 V
, 1 A max.
Frequency band
110-205 kHz
wireless charging distance
max. 2-8 mm
minimum distance to medical devices
20 cm
Dimensions
Ø68 x 11 mm
Weight
34 g
Colour
black
USB charging cable
Connectors
USB 2.0 micro male (type B),
USB 2.0 male (type A)
Cable length
~ 1.0 m
Weight
23 g
3
Intended Use
We do not permit using the device in other ways like described in chapter
“Description and Function“. Use the product only in dry interior rooms.
Not attending to these regulations and safety instructions might cause
fatal accidents, injuries, and damages to persons and property.
4 Preparing
•
Compare the specifications of all used devices to ensure
compatibility.
•
Check the scope of delivery for completeness and integrity.
5
Connecting, placing and charging
1.
Place the wireless charger onto a plane, horizontal surface.
2.
Plug the USB charging cable (3) into the USB micro female (4) of the
wireless charger and into the USB charging socket of
- an USB charging adaptor or
- a PC
The LED (2) flashes 3 times blue after connecting and then switches off.
Thereafter, the device enters standby mode.
3.
Place a Qi standard-able device onto the wireless charging pad.
The LED
- shines blue, when the device is recognized and charges.
- flashes, when the charging position of the device is improper.
•
Move the device a little back and forth until the LED shines blue.
4.
Check the charging state of your device by its status display.
5.
Remove all cable connections after use.
The device switches off automatically after charging.
6
Maintenance and Cleaning
The product is maintenance-free.
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and dust-protec-
ted ambience when not in use.
•
Keep and use the original packaging for transport.
7
Disposal Notes
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current form under
the given contact details.
8
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
9
EU Declaration of Conformity
Hereby the Wentronic GmbH ensures, that the mentioned radio system
type is conformed to Directive 2014/53/EU. The full text of EU Declarati
on of Conformity is available at the following Internet address:
https://www.wentronic.de/en/