9
8
length of the videos that the camera records follow the directions
below.
To set the time on your camera follow the directions below:
1. Use the MODE (4) button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
2. Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the camera’s
screen, push the OK (5) button to stop recording.
3. Push the MENU (6) button taking you to the VIDEO menu.
4. Use the DOWN (9) button to highlight the setting named
“Loop Recording” and push OK (5).
5. Use the UP (7) and DOWN (9) buttons to highlight the
required video length (The OFF setting will record the
longest possible loops keeping the file size under 2GB, which
is around 7 minutes at 1080P resolution).
6. To confirm selection push the OK (5) button, the camera will
take you back to the VIDEO menu.
Set G-Sensor
The G-Sensor monitors any unnatural movements of the vehicle
and logs the associated footage as “Locked” ensuring any footage
of potential incidents are not recorded over with the regular loop
footage.
To set the G-Sensor follow the directions below:
1. Use the MODE (4) button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
2. Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the camera’s
screen, push the OK button to stop recording.
3. Push the MENU (6) button taking you to the VIDEO menu.
