11
10
Set Motion Detection
Motion Detection monitors on screen movement and will start
recording when movement is detected. Motion Detection will also
stop recording after 10 seconds of no on screen movement.
To set up Motion Detection on your camera follow the directions
below:
1. Use the MODE (4) button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
2. Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the camera’s
screen, push the OK button to stop recording.
3. Push the MENU (6) button taking you to the VIDEO menu.
4. Using the DOWN (9) button Highlight the setting named
“Motion Detection” and push OK (5).
5. Use the UP (7) and DOWN (9) buttons to highlight either
OFF or ON.
6. To confirm selection push the OK (5) button, the camera will
take you back to the VIDEO menu..
