•
Cancel
- closes the window and returns to the main
screen.
Note!
After cleaning and disinfecting the scanner, put the protection tip on the
scanning tube to protect its optics from contamination when not in use.
Note!
The
Standby
button on the cart also functions as a
Reset
one to restart the
system in case it becomes frozen and stops responding. Should that happen, push
and hold the
Standby
button pressed for about 5 seconds to restart the system.
4.7 TRIOS Client
3Shape TRIOS installer contains two installation options:
Cart
and
Client
.
The
Cart
version is installed directly on a TRIOS cart.
The
Client
version can be installed on regular PC's for an easy data-exchange between TRIOS cart and
client PC's within the clinic. The Client can be used for all TRIOS operations except scanning such as,
creating new orders and reviewing old ones.
Note!
The Client cannot run if the Cart or Pod PC is turned off.
Software Requirements for installing 3Shape TRIOS Client:
•
Windows XP or later.
•
Microsoft .Net 4. (version 4.5 is part of the installer)
Step 1: Enable Client sharing on the Cart
Before you can start using the Client, Client sharing must be enabled on the Cart.
1.
In the Cart interface, select
Configure
from
the Service toolbar on the left to open
Settings
.
2.
Select
Connection
and press the
Client
sharing
button in the
Connection
page
.
60