18
User’s Manual
D. Fill in the IP address, subnet mask, DNS address, and gateway in the pop-
up window, and then click “OK” to perform the same operation (refer to
Note C), and then the network port function can be used normally after
waiting for 20s.
Note:
A. The network port function requires that the bracket has a customized USB
network port, or the customer purchases a USB-A to LAN port adapter with
a specified chip (the device Type-c does not support OTG, so the Type-C
to LAN port adapter cannot be used).
B. Priority: WIFI>4G>Ethernet, when using Ethernet, you need to disconnect
WIFI and close the 4G connection (just close the Mobile data in the status
bar).
C. When using Ethernet, the Type-c port of the tablet cannot be connected to
other devices, the bracket needs to be connected to DC power and the
bracket switch is closed circuit state.
3.2.5. Using ACC
3.2.5.1. ACC Connection Instruction
Connecting the tablet with vehicle power supply through extended cable or
docking station, and connecting ACC wire on extended cable of the tablet
with ACC of vehicle.
3.2.5.2. ACC Functions
I. Power on the tablet if ACC rise above 5V.
II. Wake up tablet from sleep mode once ACC voltage rise above 5V.
III. Close the screen and enter sleep mode after a setting delay time once
