Maintenance instructions
and warranty
Maintenance instructions
1. Wash out the tub and the shaft once per year using a water hose.
2. The lamella unit can be cleaned with a high pressure cleaner.
However, do not hold the gun too close to the screen surface, otherwise damage may result.
3. Degrease the filter surface
Pollen and air pollutants may cause grease deposits on the fine screen surface, which must
be removed. Loosen and pull out the fine screen; clean both sides using a brush and
detergent. It is best to do this after the pollen season, around the end of May / beginning
of June. Push the screen back into the lamella unit correctly; insert the lamella unit into the
filter body.
Warranty
If a delivery or performance is defective, then 3P technology at its own discretion must either repair the
defect or deliver a new item that is free of defects. If the repair fails twice or if it is not economically
justifiable, then the buyer/client has the right to withdraw from the contract or to reduce its payment ob-
ligation accordingly. Obvious defects must be reported immediately, unrecognisable or concealed defects
immediately upon their discovery, in both cases in writing. 3P Technik is liable for repairs and deliveries of
new items to the same extent as for the original contractual item. In the case of delivery of new items
the warranty period begins again from the start, but only to the extent of the new delivery. Warranty is
given only on newly manufactured items. The warranty period is 24 months, starting from delivery to our
contract partner. Sections 377 of the HGB (German Commercial Code) continue to apply.
3P expressly states that wear is not a defect.
The same applies to faults that occur due to inadequate maintenance.
Öschstraße 14
73072 Donzdorf - Germany
T +49 (0) 71 62 - 94 60 7-0
F +49 (0) 71 62 - 94 60 7-99
[email protected]
www.3ptechnik.com
