User manual
18
0xFFF are reserved. All other values may be used as VLAN identifiers, allowing up to 4,094 VLAN.
Main function of IEEE 802.1Q VLAN is the VLAN tag. The tag including VLAN information can insert in
the Ethernet frame. The device transmits the data according its transmission rules. VLAN tag protocol in the data
frame is 2 byte; the number is 0x8100.
（
Figure 5.6.2
）
1. Add Item
1. File in VLAN item in 802.1Q VID (Range: 1-4094);
2. Choice port and add into VLAN table, if do not choice the port, it displayed ―-‖ on right side, ―U‖ means
the port will be added in VLAN table and no tag of the egress frame. ―T‖ means the port will be added in VLAN
table and no need tag the egress frame
3. The default setting of the port is PVID, change the VLAN group member‘s port PVID the same as VID
(For special application, and PVID and VID can be different)
4. Choice
“
Add/Edit
”
Button, the VLAN item will be added in VLAN table, Will be replace directly if there
have same VLAN before configuration.
5. Choice ―Apply‖
2. Delete Item
Delete the item in the table
3. VLAN configuration
：
VLAN identification replace configuration:
（
Figure 5.6.3
）
Manage VLAN ID
：
There must have members in VLAN, can access switch regularly through VLAN group members.
For example: If configure VLAN to VLAN2, it must have members (Like as port 2 and port3), then port 2
and port 3 can access switch regularly.
（
Figure 5.6.4
）
