CLI user manual
29
9.4 The Ring1 configuration
User can use the following command to configure SWRing 1 after enabling it.
SWRing1 configuration:
Operating
Command
Description
Open
SWRing1
Enable
1
1: Open swring1
Configure
SWRing1
Config ring1
<portlist>
<portlist>: Ring Port
Example:
Configure Port 3 and 4 to be Ring Port of SWRing1.
Switch(Ring)#
Enable ?
{1|2|3|4}
1 --Enable Ring I
2 --Enable Ring II
3 --Enable Ring III
4 -- Enable RSTP
Switch(Ring)#
Enable 1
[OK]
Tip: This configuration will be validated after restarting
Switch(Ring)#
config ring1 3,4
[OK]
Tip: This configuration will be validated after restarting
9.5 The Ring2 configuration
User can use the following command to configure SWRing 2 after enabling it.
SWRing2 cofiguration and modification:
Operating
Command
Description
Configure
Swring2
config ring2
{1|2}
<ID><Looptype>
<port><hellotime>
{1|2} : Ring Group 1, Ring Group 2
<id>: Ring ID, value is [0-255]
<Looptype>:Ring type
<portlist>: Ring Port
<hellotime>: value is [0-300]
Modify
Swring2
Modify ring2
{1|2}
<options> <parameter>
{1|2}: Ring Group 1, Ring Group 2
<options>: -h means Hellotime, -i Ring
ID
–p Ring Port
<parameter>:
corressponding
parameter to -h|-i|-p