3onedata IES618 Series, Руководство пользователя CLI, Страница: 22 / 49

CLI user manual
17
4.3 Ingress bandwidth configuration
By default, Ingress bandwidth does not limit.
Table 4.3.1 Ingress bandwidth configuration:
Table 4.3.1
Operating Command Description
Ingress
bandwidth
Config inrate <portlist>
<low_bw> <normal_bw>
<medium_bw> <high_bw>
<portlist>: 1,3,5-8 or all
<Bandwidth>:
(128k,256k,512k,1M,2M,4M,8M)
0: unlimited
Example: set the 1 and 2 port of Ingress bandwidth is Low priority for 1M, general priority is
2M, Medium priority for 4M, higher priority for the 8M.
Switch(Bandwidth)# config inrate 1,2 1M 2M 4M 8M
[OK]
4.4 Configuration of Type of ingress limited packets
By default, only the entrance limitation of broadcast packets.
Table 4.4.1
Operating Command Description
Configuratio
n of type of
ingress limited
packets
Config intype <portlist>
{0|1|2|3}
<portlist>: 1,3,5-8 or all
{0|1|2|3}: Limit the packet type
0 --All frames
1 --Broadcast,Multicast and flood unicast
frames
2 --Broadcast and Multicast only
3 --Broadcast only
Example : set port 2 and port 1 entrance limit data " All frames ".
Switch(Bandwidth)# config intype 1,2 0
[OK]
4.5 Displays the bandwidth configuration information
Table 4.5.1 shows the bandwidth allocation information command:
Table 4.5.1
Operating Command Description
Display Ingress bandwidth
information
Show inrate <portlist>
<portlist>: 1,3,5-8 or all
Display Egress bandwidth
information
Show egrate <portlist>
<portlist>: 1,3,5-8 or all
Show type of ingress limit packets Show intype <portlist> <portlist>: 1,3,5-8 or all
Example: display port Ingress bandwidth information 1, 2, 3
Switch(Bandwidth)# show inrate 1-3
Low Normal Medium High
port 1 1M 2M 4M 8M