CLI user manual
42
Operating
Command
Description
Modify ring3
Modify
ring3
{1|2}
<options>
<parameter>
{1|2}
：
1 ring group 1, 2 ring group 2
<options>
：
-H: on behalf of Hellotime, [0-300]
-i: ring network identification, 0-255
-t; ring type: 0: Single
1: Couple
2: chain
3: Dual_homing
-p: ring network port
-s: enable/disable
<parameter>
：
And the parameter
matching -h|-i|-t|-p|-s
Close Ring 3
Close ring3
{1|2}
1: Ring network group 1
2: Ring network group 2
Example: configuration Ring3 port 1 and 2 in ring group 1, ring ID 1, hellotime is 0, the ring type couple;
Switch(Ring)#
Config ring3 1 1 1 1,2 0
[OK]
Tip: This configuration will be validated after restarting
Example: to modify the second groups in the Ring3 ring network ports for 4, 5;
Switch(Ring)#
Modify ring3 2 -p 4,5
[OK]
Tip: This configuration will be validated after restarting
Example: close ring 3 group1;
Switch(Ring)#
Close ring3 1
[OK]
Tip: This configuration will be validated after restarting
10.7
The RSTP configuration
RSTP enabled, can use the following command to set the RSTP.
Table 10.7.1 RSTP to set and modify.
