CLI user manual
6
1.4 Command line port
The switch provides
command lines port and its configuration for user’s easy
configuration and management. Command lines port includes the following features:
1. Local configuration through Console port;
2. Supports history command saving which means it can save 10 pieces. History
commands can be selected by up and down key.
3. User can type in
“help” or ”?” to get some help;
4. Supports intelligent complement with Tab when commands input;
5. Command interpreter take the method of partial matching. User can type in
conflict-free key words, such as config command, only need to type in conf.
1.4.1 View of Command Lines
The switch view of command lines aim at configuration of different functions. First of all,
the switch establish connection, then confirmation of user name and password finished, after
enter the correct user name and password, enter “help or ?” in “switch”, enter into system
view, Under the view of system, corresponding view appears after typing indifferent
command.
Table 1.4.1 system view command list
View
Function
DOS Prompt
Enter
Quit
System View
Switch#
Quit and
return to
user login
Information
Show
or
modify
device
information,
like
software
version, IP address, etc.
Switch
(information)#
Information
Exit and
return to
the view
of system
Serial server
Show or modify the COM
setting and information
Serial(COM1)#
Serial
Port Settings
Show or modify the port
information, such as: duplex
mode, port enable
Switch (Port)#
Port
Bandwidth
Management
Show
or
modify
the
bandwidth information, such
as the inlet and outlet
bandwidth settings etc.
Switch
(Bandwidth)#
Bandwidth
IGMP Snooping
Set IGMP snooping or IGMP
query, show MAClist
Switch
(Igmp)#
IGMP
VLAN
View or modify the Vlan
information, such as the
addition of Vlan, PVID, port
type etc.
Switch (Vlan)#
Vlan
