- 4 -
4.
All the cable cannot have break-down and terminal in the
middle;
5.
Cables should be straight in the hallways and turning;
6.
Cable should be straight in the groove, and cannot beyond the
groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;
7.
User cable should be separated from the power lines. Cables,
power lines and grounding lines cannot be overlapped and
mixed when they are in the same groove road. When cable is
too long, it cannot hold down other cable, but structure in the
middle of alignment rack;
8.
Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9.
It should have corresponding simple signal at both sides of the
cable for maintaining.
Specification
Technology
Standard: IEEE802.3, IEEE802.3u, IEEE802.3z/ab, IEEE802.3x,
IEEE802.1d, IEEE802.1w, IEEE802.1s, IEEE802.1q,
IEEE802.1p, IEEE802.1x, IEEE802.3ad
Flow control: IEEE802.3x flow control, Back Pressure flow
control
Protocol
ARP
ICMP
TCP
UDP
DHCP
DNS
HTTP
Telnet
RSTP
MSTP
LLDP
LACP
IGMP
GMRP
SNMP
Interface
RJ45 port: 10/100 /1000BaseT(X), flow control, full / half duplex,
adaptive work mode, MDI/MDI-X adaptive
Combo port: 1000Base-X SFP slot or 10/100/1000Base-T(X)
Gigabit SFP port: 1000Base-X SFP slot
Console port: CONSOLE Admin Port (RJ45)
Alarm port: 5-core 5.08mm wiring terminal (R+/R-),
2-way relay alarm output
Transmission distance
Twisted-pair: 100m (standard CAT5/CAT5e cable)
Multi-mode fiber: 1310nm, 2km
Single mode fiber: 1310nm, 20/40Km
1550nm, 60/80/100/120Km
LED indicator
Power indicator: P1/P2
Alarm indicator: ALM
Operation indicator: RUN
Port connection / operation status indicator: Link/ACT (1~28)
Switch attribute:
Transmission mode: store-and-forward
MAC address: 9K
Cache: 12Mb
Switched Bandwidth: 56G
1000M forwarding rate: 1488100pps
Power Supply
AC input voltage: 100VAC~240VAC
AC input terminal: three-phase socket with rocker switch
Support 2-way AC input
Consumption
No-load consumption: 20.3W@220VAC
Full-load consumption: 25W@220VAC
Mechanical characteristics
Shell: IP30 protection, metal shell
Installation: 19” rack-mounted
Weight: 3.9kg
Dimension (L*W*H): 440mm×284mm×43mm
Working environment
Working temperature: -40
70
Storage temperature: -40
85
Humidity: 5%~95% (no condensation)
Industry Standard:
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 4
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification:
CE, FCC, RoHS, UL508 (Pending)
Warranty:
5 years
