3nStar PTE0912, Руководство пользователя

Страница: 26 / 27

26
STEP 4: Release the memory by pressing outwards on the metal ends of the connector. The memory will release
and you can remove it by pulling it out in a 45-degree angle.
Adding or Removing the M.2 From Tray
Note: This is a general reference assembly guide, the actual display back cover may not match your product. It will not
matter to the assembly. Make sure the system is off before removing or installing the M.2 tray from the system. This
system does not support hot plug of the storage device.
Tools Needed: You will need to prepare a precision screwdriver in order to assemble the M.2.
Items Included:
Thermal pad in the accesory box.
M.2 Tray with Screw x 1
M.2 (PCIe Gen III) x 1 (This can be purchased from 3NSTAR or otherwise)
STEP 1: Get thermal pad from the accessory box. Remove the plastic and place the thermal pad on to the
controller.