34
1
2
5.3 Calibrating Media Sensor by Diagnostic Tool
5.3.1 Auto Calibration
1.
Make sure the media is installed ready and the print head mechanism is closed. (Please refer to
section 3.3.)
Note: The media sensor position is moveable. Please make sure the gap (
) or black
mark is at the location where media gap/black mark will pass through for Sensing.
Gap sensor
Black mark sensor
2.
Turn on the printer power switch.
3.
Open Diagnostic tool and set interface. (The default setting is USB.)
2
The default interface setting is
1
USB interface. If USB interface
and the printer are connected, no
other settings need to be
changed in the interface field.
4.
Click the “Calibrate Sensor” button.
5.
Select the media type and click the “Calibrate” button.
