PTE0110 User Manual
1
Safety Precautions
1.
Select a flat and vibration-free table to place the terminal.
2.
A location that avoids direct sunlight, has few temperature changes, is away from water and
contains little dust should be chosen for the terminal.
3.
Please keep the terminal away from strong electromagnetic fields.
4.
To prevent fire or electric shock, avoid blocking or covering the vents and make sure nothing
goes into the terminal.
5.
In areas of poor power quality or storage, this terminal should be equipped with a separate
power supply to power it.
6.
The product uses a standard wall outlet with earthling poles and cannot be arbitrarily changed.
Confirm if the voltage nameplates of the drives match.
7.
Make sure the ground prong of the power plug is in a power outlet or power strip grounding
jack, and make sure that the grounding jack is thoroughly grounded. If poorly grounded or
ungrounded, the result will be either an electric shock, a fire, or damage to the equipment.
8.
The terminal is better not started with other high-power appliances that frequently share a
socket outlet. It should be located away from the cash register in a close and easy to swap
manner in case of an emergency and can be the fastest way to turn off the power.
9.
This equipment should be connected to a variety of cables in case of power failure to ensure
that the conduct takes the screws tighten well to be able to plug or unplug the cables.
10.
Clean the terminal, but do not use a wet rag to wipe the body or chemicals such as: gasoline,
thinners, etc.
11.
When the terminal fails, immediately cut off the power. Do not attempt open or repair it, and
instead let it be promptly authorized by others.
WARNING:
For the non-compliance with the above issues, as well as non-qualified service personnel
or the use of non-designated by the Company to provide and repair parts for maintenance of all the
consequences, the Company does not assume any responsibility.
