33
e-SHOT(Still Image Transfer) Display
e-SHOT (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are required.
6) Click
[Security Settings]
on the main menu.
) Select
[Network Control]
and enter the desired authentication password. *
see Note
) Click the
[Apply]
button to save the settings. * see Note
• The Authentication Password will be the same for
[Network Control
Port1 (Port: 23)]
,
[Network Control Port2 (Port: 9715)]
, and
[Image Transfer
Port (Port: 9716)]
.
NOTE1
• The new configuration settings are activated after restarting the
network. Restart the network connection when any configuration settings are
changed. The network connection can be restarted using
[Network Restart]
on
the main menu.
NOTE2
e-SHOT (Still Image Transfer) Transmission
e-SHOT transmission requires an exclusive application for your PC. Please visit
www.3m.com/meetings
to obtain the application and software update. Refer to the
manual for the application for instructions.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.
