3M VF-45 Скачать руководство пользователя страница 29

Страница: 29 / 32

7.2

™

VF-45

™

Plug Adapter

Screw the VF-45 Plug adapter onto the microscope.

Insert the VF-45 connector into the adapter.

Note: The adapter is keyed to accept this connector in only one

direction.

Press the LED toggle switch to the desired mode and

focus the image using the eyepiece. Slide the adapter side

to side to view each fiber individually.

Note: VF-45 plug fibers are best viewed with coaxial

illumination.

7.3

Universal 2.5 mm Ferrule Adapter

Screw 2.5 mm ferrule adapter onto the microscope.

Slide a connector ferrule into the adapter until a positive

stop is felt.

Press the LED toggle switch to the desired mode and

focus the image using the eyepiece.

Focusing Hint: If you have trouble finding the image, there

is a simple trick. Load the connector and check to see that the

light is on. Then, turn the focus adjustment clockwise until the

tube hits a stop. At this point the objective is actually touching

the sample. Look into the microscope and begin slowly turning

the tube counter-clockwise. This will slowly back the lens away

from the sample and eventually the fiber end face will come

into focus.

Содержание VF-45

































Результаты поиска

Содержание VF-45

Отзывы:

Бренды по названию

Популярные бренды

3M VF-45, Инструкция по эксплуатации

Результаты поиска

Содержание VF-45

Отзывы:

Бренды по названию

Популярные бренды