Page 8
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
2.2 Intended Use
This system is an unfinished machine and only designed for the intended use described below:
• Manual workplace for the application of single-sided or double-sided adhesive tape to different
product surfaces .
The system may only be operated in a perfect technical condition and may only be commissioned
and started-up according to regulation by the operating company .
No changes, additions or modifications to the system may be carried out without the express written
permission of 3M . Such changes may endanger the safety and are considered unintended use .
The system is an independent manual workplace, which must not be integrated into other areas
of the system .
The operating company is solely liable for damage caused by unintended use . Other prerequisites
for intended use are:
• Compliance with all valid operating instructions of the operator
• Compliance with the instructions in this documentation
• The regular performance of repair work as stipulated in this manual and in the
manufacturer documentation .
2.3 Improper Use
Any use of the system exceeding the use described in chapter
2.4 Intended Use
. This includes:
• Structural changes to the system
• Use of forbidden utilities and auxiliaries
Foreseeable misuse is also forbidden . This includes among other things:
• Use of unauthorized product contours
2.4 Noise Pressure Level
In the operational environment of the system, a noise pressure level of 75 dB (A) is not exceeded under
the intended use of the system .
2.5 Requirements for the Site of Operation
The operating site of the system must fulfill the following requirements and conditions:
• Dry, closed, dust-free environment
• Room temperature: 18 to 28°C
• Relative humidity: 95% at maximum
• No operation in explosive environment
• Smoke-free environment