Page 4
3M
™
Straight Line Laminator Single Head Manual
|
Original Assembly and Operation Instructions
Effective: August 2022
1.0 General Information
1.1 Introduction
This documentation describes a manual workplace (here the 3M
™
Straight Line Laminator Single Head)
for the application of single-sided or double-sided adhesive tape to different product surfaces (e .g ., glass,
metal profile, etc .) .
Design Continuous Laminator
Single-track adhesive tape .
1.2 Other Applicable Product Documentation
1.2.1 Company Vulkan Technic GmbH
This manual is supplemented by further regulations, project-specific instructions and other
secondary documents (drawings and more in-depth information about system components,
tables, etc .) as part of the overall documentation . This manual contains direct references to the
respective relevant document in the corresponding sections .
For supplementary documents to these instructions, such as assembly drawings and parts lists,
the following notes apply:
• All plans and drawings are for information only and are not subject to updating .
• The disclosure, the reproduction of these drawings and/or plans as well as utilization
and notification to third parties are not permitted without the express permission of the
manufacturer . Non-compliance constitutes explicit abuse and makes you liable for damages .
• All rights in the event of a patent grant or utility model registration remain reserved .
1.2.2 Further Applicable Product Documentation
The supplier documentations (in the annex) must also be followed, as they are an integral part
of the overall system .
Similarly, the stipulations for accident prevention and occupational safety and environmental
protection — based on the regulations of the country of use — including the work instructions
of the operator, are to be followed .
