background image

SST Transport and Burster Mechanism Manual

75-0302-1450-8, Version 1

Ch. 1 Getting Started • 3

Overview of the Burster Mechanism

The Burster splits tickets at their perforations so that the SST Transport can encode and print the 
tickets. There are two kinds of Bursters: the Single Infeed Burster and the Dual Infeed Burster. The 
Single Infeed Ticket Burster is the standard ticket bursting mechanism included with all SST 
Ticket Spitters. The Dual Infeed Ticket Burster is an optional product. For additional information 
on the Burster Mechanism, please refer to 

Chapter 3:  Burster Mechanism

.

Overview of the Parker

The Parker parks, or holds, tickets for a short period of time so that the SST Transport can process 

magnetic stripe vouchers, credit cards, Value Cards, or Debit Cards. You may find a Parker in the 

SST Ticket Validator, the Automatic Pay Station, or the SST Exit Verifier. For additional informa-

tion on the Parker, please refer to 

Chapter 3:  Burster Mechanism

.

Figure 1.2

Interior of Automatic Pay Station

SST Transport 

Inside Door

 

Interior

 

Ticket Throat for SST Transport 

Содержание SST



























































































Отзывы: