Headset and Belt Pack
Signature Series
3M 2002
8
The Model C1060AA Headset and Model C860AA Belt Pack Intercom controls
are shown below.
See the
3M™ Headset Intercom System, Model C1060, Operating Instructions
and the
3M™ Belt Pack Intercom System, Model C860, Operating Instructions
for
detailed information about headset and belt pack operations.
Figure 4. Headset and Belt Pack Controls
Press the ON switch to turn on the headset or belt pack.
Press the OFF switch to turn off the headset or belt pack.
Press to increase the volume.
Press to turn the volume down.
Press either switch to connect to the calling location. Hold the switch to talk to
the customer. Release the switch to listen.
9
Note
If your location has more than one wireless system, contact your local
dealer for information about Talk switch (T1 and T2) operations.
Momentarily press and release to activate the Call Station scan feature.
(Also used to disconnect a Call Station and return the system to standby mode.)
Press and hold to talk to internal personnel without being heard by the customer.
Release the switch to listen. (With the switch released, you can hear both
customers and internal paging.)
Not used for this application.
Push the battery release up and hold it while sliding the battery out of the housing.
9
Note
The C860 Belt Pack operates with either 1 or 2 batteries. If 2 batteries
are used, replace both at the same time.
Headset and
Belt Pack
1 ON
Switch
2 OFF
Switch
3 Volume
Up
▲
Control
4 Volume
Down
▼
Control
5 Talk
Switches
(T1
or
T2)
6 Page/Call
Station
Scan
Switch
7 TALK/Lock
Switch
8 Battery
Release