Signature Series
Using the C5000
© 3M 2002
7
•
Use the Left/Right Arrow keys to find the desired Call
Station.
•
Select a specific Call Station as a starting number:
- Press a key to select a starting number.
- Use the Left/Right Arrow keys to find the desired Call
Station.
3. Proceed as described under Steps 2 through 4 under the
previous section One Call Station Calling Station Selector
All Call Mode
The All Call mode allows the attendant to speak to all Call Stations
at once. All Call mode can be entered at any time. To use All Call
mode:
1. Hold the ALL CALL key down.
The display shows ALL CALL and TLK.
2. Talk into the microphone.
3. Release the ALL CALL key.
The system goes to the Standby mode or to the previous call
connection.
Off Line Mode
The Off Line mode is the equivalent of the Station Selector being
turned off. In the Off Line mode, the Station Selector does not
respond to call requests (does not beep).
The Station Selector can be put in Off line mode from Standby
mode. To do this, repeatedly press the down arrow key to reach
minimum level. The display shows OFF LINE.
To exit Off Line mode and enter Standby mode, press the up arrow
key once. Audio level is set to the mid level of 8.
Error Messages
The system displays one error message: NO COMMUNICATION.
If this message occurs, call your 3M
authorized dealer or call
3M
Technical Support at 800-328-0033.
:
:TLK
A L L C A L L
* OFF LINE *
UP ARROW To Exit
! E R R O R !
NO COMMUNICATION
