3M Scotch-Weld Hot Melt Applicator EC, Руководство пользователя

Страница: 11 / 33

© 3M 2006
9
Adjusting Trigger Stroke and Shot Size (continued)
Caution
Avoid contact with hot adhesive
and the applicator tip.
May cause
burns.
Wear safety glasses when
using.
4. Snap the stroke adjuster into a new position on the entry track
(see Figure H).
• For a shorter stroke or smaller shot size, move the stroke adjuster
forward (see Figure I).
• For a longer stroke or larger shot size, move the stroke adjuster
toward the rear.
5. When the trigger stroke and shot size are established, ensure that the
stroke adjuster is correctly seated on the entry track (see Figure J).
6. Ensure that the white ring on the inside of the stroke adjuster moves
freely. If not, remove and reinstall the stroke adjuster (see Figure J).
Figure H
Figure I
Figure J
!