3M PELTOR RCU-300 Скачать руководство пользователя страница 14

Страница: 14 / 17

13.2. LIMITATION OF LIABILITY

EXCEPT WHERE PROHIBITED BY LAW, IN NO EVENT

SHALL 3M BE LIABLE FOR ANY DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR

DAMAGES (INCLUDING LOST PROFITS) ARISING FROM

THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY

ASSERTED. THE REMEDIES SET FORTH HEREIN ARE

EXCLUSIVE.

13.3. NO MODIFICATION

Modifications to this device shall not be made without the

written consent of 3M Company. Unauthorized modifications

may void the warranty and the user’s authority to operate the

device.

NOTE:

•   Do not mix old and new batteries.
•   Do not mix alkaline, standard, or rechargeable batteries.
•   To properly dispose of the battery, follow local solid waste

disposal regulations.

• Only use AA non-rechargeable or Ni-MH rechargeable

(as applicable) batteries.

10.2.1. BATTERY DISPOSAL

Many rechargeable batteries are required to be recycled by

local, state/province, and national laws. To properly recycle/

dispose of the battery or battery pack, always follow local

solid waste disposal regulations.

11. MAINTENANCE

11.1. TO CLEAN THE PRODUCT

• Wipe the product with a lightly damp cloth. Keep the

battery cap and sockets free from dirt and other debris.

• Keep the battery cap and sockets free from dirt and other

materials.

12. ACCESSORIES

Name

Type

RCU-300NA/1

3M™ PELTOR™ Remote

Control Unit, RCU-300NA

FE0344/1

3M™ PELTOR™ Spring

steel bracket RCU-300

DE0408/1

3M™ PELTOR™ Battery

cap kit

TKD8003/1

3M™ PELTOR™ SCU

Attachment clip

For more information about spare parts and accessories,

please contact 3M Technical Services. Refer to contact

information listed on the last page of this manual.

13. WARRANTY AND LIMITATION OF

LIABILITY

NOTE:

The following statements do not apply in Australia and

New Zealand. Consumers should rely on their statutory rights.

13.1. WARRANTY

In the event any 3M Personal Safety Division product is found

to be defective in material, workmanship, or not in conformity

with any express warranty for a specific purpose, 3M’s only

obligation and your exclusive remedy shall be at 3M’s option,

to repair, replace or refund the purchase price of such parts

or products upon timely notification of the issue by you and

substantiation that the product has been stored, maintained

and used in accordance with 3M’s written instructions.
EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY

IS EXCLUSIVE AND IS IN LIEU OF ANY EXPRESS OR

IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS

OR A PARTICULAR PURPOSE OR OTHER WARRANTY OF

QUALITY, OR THOSE ARISING FROM A COURSE OF

DEALING, CUSTOM OR USAGE OF TRADE, EXCEPT OF

TITLE AND AGAINST PATENT INFRINGEMENT.

3M has no obligation under this warranty with respect to any

product that has failed due to inadequate or improper

storage, handling, or maintenance; failure to follow product

instructions; or alteration or damage to the product caused by

accident, neglect, or misuse.

Содержание PELTOR RCU-300


















Результаты поиска

Содержание PELTOR RCU-300

Отзывы:

Бренды по названию

Популярные бренды

3M PELTOR RCU-300, Руководство пользователя

Результаты поиска

Содержание PELTOR RCU-300

Отзывы:

Бренды по названию

Популярные бренды