manualshive.com logo in svg

3M PELTOR RCU-300, Руководство пользователя

Поделиться
Скачать
3M PELTOR RCU-300 Скачать руководство пользователя страница 13

11

The SCU-300 will not 

connect with or operate 

the ComTac™ VII and/or 

TEP-300.

Make sure there are fully charged batteries in the SCU-300.
Restart the ComTac™ VII and/or TEP-300. For more information see product manuals for 

ComTac™ VII and/or TEP-300.
Restart the SCU-300. 

Make sure the SCU-300 is correctly fitted and aligned with ComTac™ VII. 

Refer to the manual 

for “3M™ PELTOR™ Tactical Modular Audio System”.
Make sure the products in the 3M™ PELTOR™ Tactical Modular Audio System have been 

started in the correct order. Refer to the manual for “3M™ PELTOR™ Tactical Modular Audio 

System”.
Press and hold the menu button on the SCU-300 for at least 10 seconds or until 2 short beeps 

indicates a successful pairing. The headset will indicate “NFMI pairing on”.
Do a factory reset of the SCU-300. Refer to “8.4.19. Factory reset”.

NFMI connection is 

unstable.

If several users are placed close to each other, connect your headset to SCU-300 with the 

headset cable. Refer to ““6.9. To connect to an external radio”.

I get thrown out of the 

menu.

The user automatically exits the menu if no button is pressed for 10 seconds.

I cannot control the system 

with the RCU-300.

Make sure there are fully charged batteries in the SCU-300.
Check the battery level of the RCU-300. Refer to “8.4.1. Battery status”.
Pair the SCU-300 to the RCU-300. Refer to “6.6. To pair the RCU-300 to the SCU-300”.
Make sure that you are using the correct RCU-300. 
Make sure the RCU-300 is not too far away from the SCU-300. 
Do a factory reset of the RCU-300. Refer to “6.4. To power on the RCU-300”.

EN

10.  STORAGE AND DISPOSAL

10.1.  STORAGE

•  Clean the product before storage.
•  Examine the product for wear or damage.
•  Keep the product in a clean and dry area within a 

temperature range of: -20°C/-4°F to 50°C /122°F.

•  Do not put the product in sunlight during storage.
•  During long term storage, remove the batteries from  

the battery holder. 

10.2.  DISPOSAL

•  Obey national regulations.
•  To properly dispose of the battery, follow local solid waste 

disposal regulations.

•  Use the local recycling system for electronic equipment. 
•  This product contains electrical and electronic components 

and must not be disposed of using standard refuse 

collection. Please consult local directives for disposal of 

electrical and electronic equipment.

Содержание PELTOR RCU-300


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды