3M Peltor DECT-Com II, Руководство пользователя

Страница: 15 / 22

14 15
Tighten the screw with a suitable tool. ( Caution : When tightening the screw, do not use your fingernail, it can be broken!)
3.1.3.3 RECHARGEABLE BATTERIES IN EXTERNAL BATTERY CARRIER
Any rechargeable batteries in the battery carrier DC2032 must be taken out to be charged with an appropriate external
charger according to the batteries specification.
3.2 FIXED MOUNTED POWER SUPPLY
Any main unit, which should not be portable (carried around), could preferably be placed in a fixed mounted power supply/
holder DC2068 for “unlimited” working time without charging or changing batteries. Also the power supply/holder may be
used for fixed mount of main units in high or low temperatures (below +5°C or above +45°C), where NiMH batteries can not
be charged.
Notice : The Power Supply/holder DC2068 will supply a main unit with sufficient power also in usage temperatures from
-26°C to +55°C, but it will only “maintenance charge” the internal rechargeable battery pack !
A main unit with a rechargeable NiMH-battery pack DC2033 in “good condition” may also have enough power for serving
the system properly during a short power outage!
NOTICE! No other power source than the Peltor DECT-Com II mains adapter DC2061 (included in the package at delivery)
may be used together with the power supply/holder DC2068 ! It is equipped with exchangeable European, UK and US type
mains connectors, for the input of 100 ─ 240 Volt AC, 50/60 Hz.
3.2.1 AUTOMATIC RESTART OF A BASE UNIT
With the Connector Sealing Plug DC2078 it is possible to have a base unit, which is fixed placed in a power supply DC2068 ,
automatically restarted after a power failure. Instead of a headset in the connector on top of the base unit, the “arm” of
the connector sealing plug is pressing on the [ M] button of the main unit, enabling automatic restart after shorter power
outages.
3.3 MAINS ADAPTER
The mains adapter DC2061 is also available as a separate spare part. It is equipped with exchangeable European, UK
and US type mains connectors, for the input of 100 ─ 240 Volt AC, 50/60 Hz and may replace a faulty mains adapter for a
charger/holder DC2064 or a power supply/holder DC2068 .
(It should also be used with a programming charger/holder DC2065 , but which is only available for Authorised Peltor DECT-
Com II Dealers.)
3.3.1 TECHNICAL DATA, MAINS ADAPTER DC2061
Input: 100 – 240 V≈, 50/60 Hz, 400 mA
Output: 9.0 V 1.0 A
4. ANTENNAS
A DECT-COM II main unit normally works with one of two antennas; one internal on the printed circuit board and one
external antenna, mounted in a connector on top of the unit.