manualshive.com logo in svg

3M Nanolock 3101214, Инструкция по эксплуатации

Поделиться
Скачать
3M Nanolock 3101214 Скачать руководство пользователя страница 19

19

APPENDIX A - TWIN SRL FIXED D-RING HARNESS INTERFACE

Older ExoFit Full Body Harnesses with a Fixed D-Ring require a special Twin SRL Harness Interface to mount two 

Nano-Lok SRLs on the back of the harness just below the Dorsal D-Ring. Specific Twin Leg Nano-Lok SRL models 

are available for installation on ExoFit Fixed D-Ring harnesses (see Figure 20). 

Figure 20  –  Twin Leg Harness Mount Models for ExoFit Fixed D-Ring Harnesses

J - 3100107

Twin SRL Fixed 

D-Ring Harness 

Interface

A - Steel Snap Hook

B - Steel Rebar Hook

C - Aluminum Rebar Hook

D - Steel Swiveling Snap Hook

E - Aluminum Carabineer (captive eye)

F - Aluminum Snap hook

Swivel End

Lanyard End

Model

Swivel End

Lanyard End

J - 3100107

Twin Leg Harness Mount Models

A

B

C

D

E

F

3101271

1

2

3101272

1

2

3101273

1

2

3101274

1

2

3101287

1

2

3101288

1

2

1.0  HARNESS MOUNTING:

 To mount two Nano-Lok SRLs on an ExoFit Full Body Harness with the Twin SRL 

Fixed D-Ring Harness Interface (Figure 21):

1.  Loosen the Harness Webbing:

 Pull out on the Web Straps (A) where they pass through the bottom 

of the Dorsal D-Ring (B) until there is sufficient space to insert the Twin Leg Interface between the Web 

Straps and Back Pad.

2.  Open the Harness Interface:

 With the Twin Leg Interface orientated as illustrated in Figure 21 - Step 

2, push the Locking Sleeve (C) to the right and then turn clockwise to unlock the Gate (D). Swing the 

Gate (D) down to open. 

3. 

Thread the first Nano-Lok SRL onto the Harness Interface: 

Insert the Nose of the Connector (E) 

through the Swivel Eye (F) on the SRL and then rotate the SRL around to the Gate End of the Connector 

(G). The Gate can be closed to allow clearance for the Swivel Eye between the Gate and Spine of the 

Connector.

4.  Position the Harness Interface around the Web Straps:

 Insert the Nose of the Connector (E) 

behind the Web Straps (A). Rotate the Connector behind the Web Straps until the Connector surrounds 

the Web Straps.

5.  Add the second Nano-Lok SRL on the Harness Interface:

 Slide the SRL’s Swivel Eye (F) over the 

Nose of the Connector (E) and position the SRL Swivel Eye in the Nose End of the Connector. 

6.  Close the Harness Interface

: Allow the Gate (D) to swing closed and the Locking Sleeve (C) to rotate 

back to locked position. Once the Harness Interface is closed, pull the Web Straps (A) back through 

the Dorsal D-Ring to eliminate slack in the webbing and secure the Harness Interface between the Web 

Straps and Back Pad.

Содержание Nanolock 3101214

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды