28
Multifunctional settings
PICTURE menu
Item
Description
BRIGHT
8VLQJWKHEXWWRQVŸźDGMXVWVWKHEULJKWQHVV/LJKW
Ù
Dark
CONTRAST
8VLQJWKHEXWWRQVŸźDGMXVWVWKHFRQWUDVW6WURQJ
Ù
Weak
GAMMA
8VLQJWKHEXWWRQVŸźVZLWFKHVWKH*$00$PRGH
#1 DEFAULT
Ù
#1 CUSTOM
Ù
#2 DEFAULT
#3 CUSTOM
Ù
#3 DEFAULT
Ù
#2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then
SUHVVLQJWKHEXWWRQŹRUWKH(17(5EXWWRQ
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones.
&KRRVHDQLWHPXVLQJWKHEXWWRQVŻŹDQG
DGMXVWWKHOHYHOXVLQJWKHEXWWRQVŸź
Using a test pattern
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern
Ö
Gray scale of 9 steps
Ramp
Õ
Gray scale of 15 steps
Eight of equalizing bars corresponds to eight of tone level of test
pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
With the PICTURE menu, items shown in the table below
can be performed.
&KRRVHDQLWHPXVLQJWKHFXUVRUEXWWRQVŸźRQWKH
SURMHFWRURUUHPRWHFRQWURODQGSUHVVWKHFXUVRUEXWWRQŹ
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
MENU [RGB1]
:SELECT
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MENU
BRIGHT
CONTRAST
GAMMA
COLOR TEMP
COLOR
TINT
SHARPNESS
PROGRESSIVE
MY MEMORY
+0
+0
DEFAULT 1
HIGH
+0
+0
+0
TURN OFF
SAVE 1
1
+0
2
+0
3
+0
4
+0
5
+0
6
+0
7
+0
8
+0
GAMMA [CUSTOM 1]
ENTER :
DEFAULT
CUSTOM
DEFAULT
CUSTOM
GAMMA
DEFAULT
CUSTOM
#1
#2
#3
3M™ Digital Projector X15i
© 3M 2006. All Rights Reserved.
