17
Power on/off
Power on/off
Turning on the power
WARNING
Ź
When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE
• Turn the power on in right order. Please power on the projector before
the connected devices.
STANDBY/ON
button
1.
0DNHVXUHWKDWWKHSRZHUFRUGLV¿UPO\DQGFRUUHFWO\FRQQHFWHGWRWKH
projector and outlet.
2.
Open the lens cover, and set the power switch to the ON position.
The power indicator will light to solid orange. Then wait several seconds
because buttons may not function for these several seconds.
3.
Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking
green. When the power is completely on, the indicator will stop blinking and
light green.
To display the picture, select an input signal according to the section "Selecting an
input signal"
(
19
)
.
POWER
(Solid orange)
POWER
(Blinking green)
POWER
(Solid green)
POWER indicator
Power switch
STANDBY/ON
INPUT
MENU
LAMP
TEMP
POWER
VIDEO
RGB
SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT
STANDBY/ON
AUTO
BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM
+
-
3M™ Digital Projector X15i
© 3M 2006. All Rights Reserved.