4
EN
NOTE:
Press
(~0.5 seconds)
the PTT button (F:16)
(fig. 5)
two
times to activate VOX or to deactivate VOX.
1:7 Communication face to face
PTL (PUSH-TO-LISTEN)
(fig. 6)
The Push-To-Listen feature enables you to instantly listen to
your environment by muting the Bluetooth
®
audio volume and
activating the level-dependent microphones. Short press
(~0.5
seconds)
the On/Off/Mode button (F:10) two times to activate
Push-To-Listen. Short press any button to deactivate Push-To-
Listen.
*1:8 Bluetooth
®
Multipoint technology
The WS
TM
models supports Bluetooth
®
Multipoint technology.
Use Bluetooth
®
Multipoint technology to connect your headset to
two Bluetooth
®
devices at the same time. Depending on the type
of Bluetooth
®
devices connected and their current activities, the
headset controls the Bluetooth
®
devices in different ways. The
headset prioritizes and coordinates activities from the connected
Bluetooth
®
devices.
NOTE:
The default setting is Bluetooth
®
Multipoint. You have to
activate Bluetooth
®
single in the setup mode of the headset.
*1:9 Pairing a Bluetooth
®
device
(fig. 7)
Press the Bluetooth
®
button
(fig. 4)
to start the Bluetooth
®
pairing
the first time the headset is powered on or after reset to factory
default. A voice message confirms, “Bluetooth
®
pairing on”.
You can also start the *Bluetooth
®
pairing by long pressing and
holding
(10 seconds)
the On/Off/Mode button (F:10) from off
mode.
A voice message confirms, “power on, battery status, Bluetooth
®
pairing on”.
Pairing mode can also be entered from the sub menu
(fig. 11).
See “
configuring your headset
”. This could be used for pairing
a second device.
Make sure that Bluetooth
®
communication is activated on your
Bluetooth
®
device. Search and select “WS LiteCom Plus” on your
Bluetooth
®
device. A voice message confirms when the pairing is
complete, “pairing complete” and “connected”.
NOTE:
You can always stop the pairing process by a long press
(2 s) on the Bluetooth
®
button
(fig. 4).
NOTE:
Only one of the two paired devices can be a two-way
radio. The headset only supports PTT over Bluetooth
®
if the two-
way radio support 3M™ PELTOR™ Push-To-Talk protocol. If you
have any questions, please contact your local distributor.
NOTE:
When a third Bluetooth
®
device is successfully paired,
one of the previously paired devices is removed from the
headset. If one of the devices is connected, the unconnected
device is removed. Otherwise, the first paired device is removed.
NOTE
: By default, the radio VOX functionality is disabled when
taking a phone call via a Bluetooth
®
connection. Once the call
has ended, VOX is automatically activated. To transmit on the
two-way radio during a phone call, press the PTT button. If the
PTT button is pressed during a phone call, your voice will only
transmit through the two-way radio and not to the phone call.
*1:10 Reconnecting Bluetooth
®
devices
When the headset is powered on, it tries to reconnect to all
paired device(s) during 5 minutes. A voice message will confirm
the connection, “connected”.
NOTE:
If the link is lost, a voice message will confirm with
“Disconnected”.
SMART TIP: If a Bluetooth
®
device is paired but not connected
and the headset is on:
Press the Bluetooth
®
button to reconnect to all paired device(s)
in the Bluetooth
®
range. A voice message will confirm the
connection, “connected”.
*1:11 Bluetooth
®
function
Bluetooth
®
is the name of a technical standard for short-
range wireless transmission, with a working range of
approximately 10 meters. This headset can be used with
other Bluetooth
®
-enabled units that support any of the
profiles: headset (HSP), hands-free (HFP) or streaming
audio (A2DP).
• If the message “no paired devices” is heard, no Bluetooth
®
device is linked to the headset.
• If the message “connecting Bluetooth
®
, connected”
is heard, a Bluetooth
®
-enabled device is linked to the
headset and connected.
• If the message “connecting Bluetooth
®
, connection failed”
is heard, a Bluetooth
®
device is linked to the headset, but
not connected.
*1:12 Answer a phone call
When the headset is connected to a phone via Bluetooth
®
wireless technology and there is an incoming call, answer
by a short press
(~0.5 seconds)
on the Bluetooth
®
button
(fig. 4).
*1:13 Reject a call
Press and hold
(~2 seconds)
the Bluetooth
®
button
(fig. 4)
to
reject a phone call.
*1:14 Toggle between phone and headset
When a call is active, it is possible to transfer the audio to
the phone, instead of using the headset.
Press
(~2 seconds)
the Bluetooth
®
button
(fig. 4)
. To return
the call to the headset, press
(~2 seconds)
the Bluetooth
®
button once more.
*1:15 End a phone call
To end an ongoing phone call, short press
(~0.5 seconds)
the Bluetooth
®
button
(fig. 4).
*1:16 Voice dial
To enable voice dial, long press
(~2 seconds)
the Bluetooth
®
button
(fig. 4)
.
* Only WS
TM
(Bluetooth
®
) models
