3M
™
Mobile Projector MP225a
© 2011 3M. All Rights Reserved.
33
En
gl
ish
•
3M’s liability for replacement of the warranted 3M product or part will
not exceed the original retail selling price of the 3M product. Exchange or
replacement products or parts assume the remaining warranty period of the
product covered by this limited warranty.
FCC STATEMENT - CLASS B
This equipment generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class “B” computing device pursuant to Subpart B of Part 15
of the FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
INSTRUCTIONS TO USERS:
This equipment complies with the requirements of
FCC equipment provided that the following conditions are met. If the cables include
a EMI ferrite core, attach the ferrite core end of the cable to the projector. Use the
cables which are included with the projector or specified.
Note:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CE Statement
ElectroMagnectic Compatibility Statement:
Meets 2004/108/EC Directive
Low Voltage Directive:
Meets 2006-95-EC Directive.
