3M
™
Mobile Projector MP225a
10
© 2011 3M. All Rights Reserved.
En
gl
ish
Getting Started
Removing the Protective Film
The 3M
™
Mobile Projector MP225a comes with a rechargeable battery.
The battery should be fully charged before using the projector with
the battery.
When the projector is shipped, there is a protective film between the battery and
the battery contacts on the projector. Remove the protective film by removing the
battery and the protective film, discard the film and finally install the battery.
Remove Battery
To remove the battery: slide the battery latch away from the battery and then lift the
battery out, starting at the end closest to the latch.
1
2
