3M mini air ionizer 960, Руководство пользователя

Страница: 5 / 8

5
Please note that placement of the 3M
™
Mini Air Ionizer 960 is important in
controlling its effectiveness. Its distance from the target object will affect the
ionizer’s performance. As distance increases, the discharge time will increase.
Determine the location of an AC 24V power supply (with a power cable using an
RJ-11 plug) and insert into the RJ-11 socket on the back of the Mini Air Ionizer
960. Since the Mini Air Ionizer 960 does not have a power switch, supplying
power to the unit automatically turns it on.
5.0 Operation
Supplying power to the Mini Air Ionizer 960 through the power socket in the
back of the unit will turn it on. A green monitor light is also illuminated on the
front of the unit, which indicates that the ionizer is on, and that power is being
applied to the ionizing electrodes.
6.0 Maintenance
Occasional cleaning of the case and of the ionizing electrodes are the only
routine maintenance procedures required.
Cleaning the case: wipe the case with a soft cloth moistened with water. If a
stronger cleaning solution is required, mild soap with water may be used. The
use of any other cleaning solutions is not recommended.
Cleaning the ionizing electrodes: when the ionizing electrodes become dirty, the
internal circuitry of the ionizer will be automatically adjusted to emit an equal
amount of positive and negative ions. Particulates on the electrode may, however,
inhibit ionization to a limited degree. The emitter points are located between
the fan blades and the rear grille. A jet of clean, compressed air can be used to
remove dirt on emitter points. If a more rigorous cleaning method is needed to
remove particulate, clean the points with a cotton swab. Access to the points
is available through the rear grille. Be careful not to damage the points during
cleaning.