![background image](http://html.mh-extra.com/html/3m/lm1/lm1_user-manual_3044613005.webp)
3
EN
(English)
V.
LIMITED WARRANTY
3M
™
Food Safety Hardware
(“Har
dw
are”)
includes the 3M
™
Clean-Trace
™
Luminometer and any associated Software and
other components supplied by 3M which are described in the applicable Installation and Use Guides
(“User
Documentation
”).
VI.
LIMITED WARRANTY AND DISCLAIMER
3M warrants that for one year from the date of shipment that the Hardware will substantially perform in accordance
with the User Documentation. THIS WARRANTY IS VOID IF: (A) THE HARDWARE HAS BEEN REPAIRED BY PERSONS NOT
AUTHORIZED BY 3M; OR (B) THE HARDWARE HAS BEEN ALTERED, MODIFIED, OR MISUSED; OR (C) THE HARDWARE IS
USED WITH PRODUCTS, SUPPLIES, COMPONENTS OR SOFTWARE NOT SUPPLIED BY 3M FOR USE WITH THE
HARDWARE; OR (D) THE HARDWARE OR A COMPONENT IS USED FOR OTHER USES (FOR EXAMPLE USE WITH OTHER
CIRCUIT BOARDS OR SOFTWARE) OR (E) THE HARDWARE HAS NOT BEEN MAINTAINED OR USED IN ACCORDANCE
WITH THE USER DOCUMENTATION. UNLESS PROHIBITED BY LAW, THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, THE IMPLIED WARRANTY OF MERCHANTABILITY, OR ANY IMPLIED WARRANTY ARISING OUT
OF A COURSE OF DEALING OR OF PERFORMANCE, CUSTOM OR USAGE OF TRADE. 3M DOES NOT WARRANT THAT THE
SOFTWARE WILL FUNCTION ERROR FREE.
If within one year after shipment, the Hardware does not conform to the express warranty set forth above, 3M’s sole
obligation and User’s sole remedy shall be, at 3M’s
option: 1) to repair or replace the non-conforming component; or,
2) refund the purchase price.
VII.
LIMITATION OF LIABILITY
UNLESS PROHIBITED BY LAW, 3M WILL NOT BE LIABLE TO USER OR OTHERS FOR ANY OTHER DIRECT, INDIRECT,
CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES INCLUDING, FOR EXAMPLE, LOST PROFITS, BUSINESS,
INVESTMENTS, OR OPPORTUNITIES EVEN IF 3M HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. The
parties agree that 3M’s total cumulative liability to User for direct damages for all causes shall not
exceed One
Hundred Dollars, or the price paid for the Hardware, whichever is higher. Some states or countries may have laws
which require liability rights different from those stated above. In such state or countries, the minimum required
liability terms shall apply.
To request service, you must request a Returned Material Authorization (RMA) number from the service center.
Please call 1-800-328-1671.
VIII.
PRODUCT DESCRIPTION
Using ATP Detection for Hygiene Monitoring and Management
The 3M Clean-Trace Hygiene Monitoring and Management System consists of the following: 3M Clean-Trace
L
uminometer, 3M™ Clean
-
Trace™ Tests, and 3M Clean
-Trace Hygiene Management Software. This system is used to
detect ATP on surfaces or in water samples in order to measure levels of contamination for the purpose of hygiene
monitoring and management.
The detection technology used is ATP bioluminescence. ATP is present in all animal and vegetable material (including
most food debris), living and dead bacteria, fungi, and other microorganisms. The 3M
Clean-Trace Tests use Luciferin/Luciferase enzyme to produce light that is proportional to the amount of ATP present.
The 3M Clean-Trace Luminometer measures the intensity of the light emitted from a sample, and it displays the test
result in Relative Light Units (RLU). Users do a validation study on their surfaces or water samples to determine the
RLU test result pass, caution and fail thresholds.
The rapid test results provided by the 3M Clean-Trace Luminometer allow users to take immediate remedial action in
response to a failing test result. The Test Point with a failing test result can be re-cleaned and retested before
production, ensuring that hygiene management goals are achieved. The results provide data that can be used to
advise the decision to begin food or beverage production.
Read the Instructions for Use documents for 3M Clean-Trace Tests before using them along with a 3M Clean-Trace
Luminometer.