L-705 - Disassembly
© 3M June 2006. All rights reserved.
14) The L-163 is the Foam Liner.
It should be replaced when parts are
missing or the liner is damaged by exposure to solvents or excessive
heat. To remove it:
a. Remove the complete L-113 Head Suspension.
b. Lift the foam liner out of the headgear.
15) The L-750 is the Hard Hat Shell.
The hard hat shell should be replaced
if it is cracked and/or damaged by contact with solvents.
16) L-133 is the protective Lens Cover.
Lens covers can be ordered in
packs of 100 or 25.
a. Up to 5 lens covers can be placed on the lens, one at a time. When
the top cover gets dirty, peel it off to reveal a clean cover.
b. The lens cover closest to the lens should not be removed in the
work area where your lens can get dirty.
17) The L-183 is the Headgear Cover Accessory.
It is an optional
accessory which provides a means of protection against buildup of
particulate on the surface of the headgear shell. It should be replaced if it
is ripped, torn, the stitching is worn, the seams are frayed or holes are
found in it. To remove it:
a. Pull it off the headgear.
b. Remove the breathing tube and pull the headgear cover off the
breathing tube.
18) The L-182 is the Air Deflector Accessory.
The L-182 is an optional
accessory which allows the redirection of the airflow towards the face. If
used, the air deflector should be replaced if it is damaged or missing. To
remove it:
a. Pull it off of the front of the headgear shell.
