9
5.0 TRAINING
It is the responsibility of the user to assure they are familiar with these instructions, and are trained in the correct
care and use of this equipment. Users must also be aware of the operating characteristics, application limits, and the
consequences of improper use of this equipment.
6.0 INSPECTION
6.1
INSPECTION FREQUENCY:
The Flexiguard
Fall Arrest System must be inspected at the intervals defined in Section 1.
Inspection procedures are described in the
“Inspection and Maintenance Log”
. Inspect all other components of the Fall
Protection System per the frequencies and procedures defined in the manufacturer’s instructions.
;
Some Flexiguard Fall Arrest Systems are equipped with a Radio Frequency Identification (RFID) Tag. The RFID Tag
can be used in conjunction with a Handheld Reading Device to simplify inspection and inventory control and provide
records for your fall protection equipment.
6.2 DEFECTS:
If inspection reveals an unsafe or defective condition, remove the Fall Arrest System from service immediately
and contact 3M regarding replacement or repair. Do not attempt to repair the Fall Arrest System.
;
Only 3M or parties authorized in writing by 3M may make repairs to this equipment.
6.3
PRODUCT LIFE:
The functional life of the Fall Arrest System is determined by work conditions and maintenance. As long
as the product passes inspection criteria, it may remain in service.
7.0 MAINTENANCE, SERVICING, STORAGE
7.1 CLEANING:
Periodically clean the Fall Arrest System’s metal components with a soft brush, warm water, and a mild soap
solution. Ensure parts are thoroughly rinsed with clean water.
;
Although highly resistant to chemicals and environmental conditions, avoid contaminating the Flexiguard
Fall Arrest System with acids, bitumen, cement, paint, cleaning fluids, etc. If the equipment contacts acids or other
caustic chemicals, remove from service and wash with water and a mild soap solution. Inspect per Table 2 before
returning to service.
7.2 SERVICE:
Only 3M or parties authorized in writing by 3M may make repairs to this equipment. If the Flexiguard
Fall Arrest System has been subject to fall force or inspection reveals an unsafe or defective conditions, remove the
system from service and contact 3M regarding replacement or repair.
7.3
STORAGE AND TRANSPORT:
When not in use, store and transport the Fall Arrest System and associated fall protection
equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may exist.
Thoroughly inspect components after extended storage.
