62
78-9000-5020-0 Rev C
−
The
Indicator Flag
will light in the
Digital Display
[T-4] above the
Output
Level
icon when in high output level and flash when in maximum output
level.
−
The
Digital Display
[T-4] will alternately flash between 577 and 133K.
2. Receiver Setup
Step 1. Press
On/Off
[2] to power the receiver on.
Step 2. Press
Menu/
O
K [6
].
Step 3. Press
Tone/Ext
[SK] to select
Tone
mode.
Step 4.
Connect a second coupler to the Receiver’s
External Jack
[10] using the Earth
Contact Frame cable or another coupler cable.
Step 5. Press
Freq
[SK Toggle] to select the highest transmitter frequency (133K or 200
kHz).
Step 6.
Check the first cable in the group by clamping the coupler around the cable.
Step 7. Press
Gain
[4] down and observe the numerical
Signal Strength
[15].
Step 8. Remember the
Signal Strength
[15] and continue by clamping the coupler
around the next cable in the group.
−
If the
Signal Strength
[15] is greater than the previous observation, press
Gain
[3] down.
−
If the
Signal Strength
[15] is less than before, ignore it.
− After checking all the cables in the group, the cable with the highest
Signal
Strength
[15] reading is the target cable.