3M DBI SALA NANO-LOK 3101526, Инструкция пользователя

Страница: 5 / 44

5
;
Before using this equipment, record the product identification information from the ID label in the ‘Inspection and
Maintenance Log’ at the back of this manual.
Table 1 – Product Specifications
System Specifications:
Anchorage: The anchorage structure for the SRD must be capable of supporting loads up to capable of
supporting loads up to 5,000 lbf (22.2 kN) for non-certified anchorages, or two times the maximum
arresting force for certified anchorages.
Service Temperature: -40°F to 130°F (-40°C to 54.4°C)
Standards: Each product model is certified to, or conforms with, the applicable standards and regulations listed
within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.
Component Specifications:
Figure 2
Reference
Component Materials
A Lifeline (see Lifeline Specifications)
B Housing Nylon
C Bottom Connector (see Connector Specifications)
D Top Connector (see Connector Specifications)
E Swivel Eye Steel
F Energy Absorber Rubber cover with polyester lifeline
--- Drum Nylon
;
Internal Components: Internal SRD components are made from a combination of Stainless Steel, Steel, Aluminum, and Nylon.
Connector Specifications:
Figure 1
Reference
Model Number Description Material Gate Opening Gate Strength
C1
3100064 Nano-Lok Harness Connector Steel 0.88 in. (22.35 mm) 3,600 lbf (16 kN)
C2
2000159 Carabiner, Triple Action Steel 3/4 in. (19 mm) 3,600 lbf (16 kN)
C3
2000112 Carabiner Steel 11/16 in. (17 mm) 3,600 lbf (16 kN)
C4
2000025 Carabiner Aluminum 3/4 in. (19 mm) 3,600 lbf (16 kN)
C5
3100084 Cab Mount Stainless Steel 1-5/8 in. (41 mm) X
C6
3100108 Twin SRD Interface Steel w/ Nylon Insert 7/16 in. (11 mm) 3,600 lbf (16 kN)
C7 3100189 Web Leg with Aluminum Snap Hook Aluminum/Kevlar 2-1/2 in. (63 mm) 3,600 lbf (16 kN)
C8
2000214 Rebar Hook Aluminum, Steel 2-1/2 in. (63 mm) 3,600 lbf (16 kN)
C9
9502116 Snap Hook Steel 3/4 in. (19 mm) 3,600 lbf (16 kN)
C10
9502058 Snap Hook Aluminum 1 in. (25 mm) 3,600 lbf (16 kN)
C11
2000023 Carabiner Aluminum 3/4 in. (19 mm) 3,600 lbf (16 kN)
C12
2000209 Rebar Hook Aluminum, Steel 2-1/2 in. (63 mm) 3,600 lbf (16 kN)
C13
2000210 Carabiner Steel 0.69 in (18 mm) 3,600 lbf (16 kN)
C14
2000217 Rebar Hook Aluminum 2-1/2 in. (63 mm) 3,600 lbf (16 kN)
C15
2109193 Rebar Hook Steel 2-1/2 in. (63 mm) 3,600 lbf (16 kN)
C16
9505254 Snap Hook (Locking) Aluminum 3/4 in. (19 mm) 3,600 lbf (16 kN)
C17
9502195 Snap Hook (Locking) Steel 3/4 in. (19 mm) 3,600 lbf (16 kN)
;
Tensile Strength:
The tensile strength of each of the connectors listed above is 22.2 kN (5,000 lbf).